Monday, 20 July 2015

'power' to the track (3) - track feeds in place

Yesterday I finally got round to getting the power feeds to the track. I soldered on the wire to connector block tags for the two track sections I had prepared

 Laid a feed wire from the control box ...
 out to a connector that sits under the lineside hut, from there two feeds go off to the track, one in the station approach
 and another on the far side just down from Rockery cutting.
I've left the wire out on the surface for easy access, so if I have any problems during run testing I can get at them easily.

No comments:

Post a Comment